Many times, but not always, a sensor’s cable can be replaced with a new cable. This is helpful if the original cable was damaged or if its length needs to be changed. –PW models terminate with the connector for a PWENC or pre-wired system.–QD models terminate with the connector for a RAWS-F Quick Deployment Station.–ETM models terminate with the connector for an ET107 weather station, but they also include a special system mounting, which is often convenient when purchasing a replacement part.–ET models terminate with the connector for an ET107 weather station.For example, the 034B-ET model designates the sensor as a 034B for an ET107 system. If a cable terminates with a special connector for a unique system, the end of the model number designates which system. For example, the 034B-ET model has a description of “Met One Wind Set for ET Station, 67 inch Cable.” Products with a set cable length terminate, as a default, with pigtails. The cable length is listed at the end of the Description field in the product’s Ordering information. If a sensor does not have an –L or other –LX designation after the main model number, the sensor has a set cable length. An –LQ model has a user-specified cable length for connection to a RAWS-P weather station.An –LC model has a user-specified cable length for connection to an ET107, CS110, or retired Metdata1.If a sensor is listed as an –LX model (where “X” is some other character), that sensor’s cable has a user-specified length, but it terminates with a specific connector for a unique system: Most Campbell Scientific sensors are available as an –L, which indicates a user-specified cable length. For example, the HC2S3-L has a –C cable termination option for connecting it to a CS110 instead of offering an HC2S3-LC model. Note: As newer products are added to our inventory, typically, we will list multiple cable termination options under a single sensor model rather than creating multiple model numbers. For example, the 034B is offered as the 034B-ET, 034B-ETM, 034B-LC, 034B-LQ, and 034B-QD.Īll of the other cable termination options, if available, are listed on the Ordering information area of the sensor product page under “Cable Termination Options.” For example, the 034B-L Wind Set is offered with the –CWS, –PT, and –PW options, as shown in the Ordering information area of the 034B-L product page. If a sensor is offered in an –ET, –ETM, –LC, –LQ, or –QD version, that option’s availability is reflected in the sensor model number. The options available for a particular sensor can be checked by looking in two places in the Ordering information area of the sensor product page: Not every sensor has different cable termination options. Wind Speed: ☐.3 m/s (0.6 mph) or 1% of reading.Wind Speed (Anemometer): 0.4 m/s (0.9 mph)
50° to +70☌ (assumes non-riming conditions) WINDSONIC1 2-D Sonic Wind Sensor with RS-232 Output Wind Speed (Anemometer): ☐.5 m/s (1.1 mph).Wind Direction (Vane): 1.8 m/s (4 mph) with 5° displacement.Wind Direction (Vane): 0.8 m/s (1.8 mph) with 10° displacement.Wind Speed (Anemometer): 0.5 m/s (1.1 mph).WINDSONIC4 2-D Sonic Wind Sensor with SDI-12 Output 40 to +50☌ (equivalent to 305 to 368 m s -1 in speed of sound)ĬSAT3BH Heated, 3-D Sonic Anemometer with Integrated Electronics Wind Speed: ☐.3 m/s (☐.6 mph) or 1% of readingĬSAT3B 3-D Sonic Anemometer with Integrated Electronics.Wind Direction: 1.1 m/s (2.4 mph) at 10° displacement.50° to +50☌ (assuming non-riming conditions)
0 kommentar(er)
